开工容量 :
150J,300J,450J,600J,750J
二叉 应用
JBW-C Computer Control Semi-automatic Charpy Impact Testing Machine is used for measuring
the metal material resistance performance under dynamic load,in order to determine the material
properties under dynamic load.
It's a necessary testing machine,not only used in the metallurgy,machine manufacture etc areas,
but also used for the science research.
3级 标准 :
ASTME23、ISO148-2006和GB/T3038-2002、GB229-200、ISO138、EN10045
4级主技术规范
150J,300J,450J,600J,750J
二叉 应用
JBW-C Computer Control Semi-automatic Charpy Impact Testing Machine is used for measuring
the metal material resistance performance under dynamic load,in order to determine the material
properties under dynamic load.
It's a necessary testing machine,not only used in the metallurgy,machine manufacture etc areas,
but also used for the science research.
3级 标准 :
ASTME23、ISO148-2006和GB/T3038-2002、GB229-200、ISO138、EN10045
4级主技术规范
模型化 | JBW-300C | JBW-450C | JBW-600C | JBW-750C |
马克斯撞击能 | 300 | 450 | 600 | 750 |
Pentulum托克 | 160.7695 | 241.1543 | 321.5390 | 401.9238 |
距离间 曲轴和相撞点 |
750毫米 | |||
撞击速度 | 5.24m/s | |||
提升角 | 150度 | |||
圆角下巴 | R1-1.5毫米 | |||
圆角撞击边缘 | R2-2.5mm,R8±0.05mm | |||
角精度 | 0.1摄氏度 | |||
标准标本维 | 10mm×10(7.5/5)mm×55mm | |||
供电 | 3phs,380V,50Hz或用户指定 | |||
净重 | 900 |